The Harris Products Group / Fluxes / Welding Fluxes
Welding Fluxes
What it is
Welding flux shields the back of a weld joint from oxygen, carries away oxides and cleans the metal. Harris lists two powders in its welding flux category: Harris® 800 all-purpose welding flux and SOLAR FLUX® Type B. Fastenal stocks only two items here: a SOLAR FLUX® Type B 1 lb can for TIG welding and a "600 Flux" 1 lb can. In oxy-fuel work, Harris explains that gas welding with a flame works only with acetylene, while braze welding of steel can use other fuel gases but needs flux because the flame does not do the cleaning that acetylene does.
How to choose
- Process. Fastenal lists the Solar Flux Type B for a TIG machine.
- Base metal. Match the flux to the metal on the item page, especially stainless and some alloys.
- Coverage. Harris says its welding flux shields the back of the weld joint.
- Package. Both items are 1 lb cans.
- Gas welding or braze welding. Harris says braze welding with low-fuming bronze needs flux, either dipped on bare rod or already coated on the rod.
- Check the rod. RG45 and RG60 gas welding rods do not need flux, according to Harris, though puddling the metal brings scale and impurities to the surface.
- "600 Flux". Harris lists its Harris® 600 powder flux for brazing bronze alloys. Confirm on the item page that the Fastenal 600 Flux is the same product.
Reading the part description
| Term | Meaning | Example |
|---|---|---|
| Type B | Solar Flux grade name | TYPE B (1) SOLAR FLUX for TIG Machine |
| 600 Flux | Harris 600 powder flux (brazing bronze alloys, per Harris) | 600 Flux 1# Can |
| 1# Can | One-pound can | 600 Flux 1# Can |
Product families
| Family | What it's for | Notes |
|---|---|---|
| SOLAR FLUX® Type B | Powder flux used with TIG | Listed for TIG on the Fastenal row |
| Harris® 600 flux | Powder flux; Harris lists it for brazing bronze alloys | One item |
Harris® 800 all-purpose powder welding flux is on the Harris site but not on the Fastenal list.
Seller tips
- Ask what is being welded and by what process before offering either flux.
- Pair with TIG rod from the Harris wire and rod line and with brushes.
- Keep expectations short: only two Harris welding flux items sit on the Fastenal list.
- If the customer is braze welding steel, sell flux with low-fuming bronze rod. If gas welding with RG45 or RG60, flux is not needed.
- Dissimilar metals and lower heat input are the usual reasons people braze weld instead of fusion weld; Harris notes less distortion.