Clean metal is the first step in every brazed or soldered joint. Harris says contaminants such as dirt, oil or heavy surface oxide stop the alloy from wetting, and advises wiping the parts and then using a stainless steel wire brush to remove the oxide. Harris lists brushes and abrasives for brazing and soldering in HVAC, refrigeration and plumbing: an alloy fitting brush, a multi-purpose 4-in-1 pipe fitting brush, sand cloth and open mesh cloth. The Fastenal list also has a synthetic acid brush.
How to choose
Tube size: wire fitting brushes on the Fastenal list come in 1/2, 3/4, 1, 1-1/4, 1-1/2 and 2 in.
Match the brush diameter to the tube or fitting so it cleans the whole socket wall.
Job: fitting brushes for pipe fittings, cloth for tube ends and small parts, an acid brush for applying flux.
Cloth: sand cloth and open mesh cloth come in rolls of different lengths (2 to 25 yards).
Pack size: brushes and cloth are sold in trays, so check how many are in the pack before comparing price.
Reading the part description
Term
Meaning
Example
12Ct
Twelve brushes in the pack
Wire Fitting Brush 3/4" 12Ct
4-In-1
Multi-purpose pipe fitting brush
4-In-1 Multi-Purpose Brush
5 Yards X 12 Pack Tray
Roll length, then rolls per tray
Open Mesh Cloth 5 Yards X 12 Pack Tray
Sand Cloth
Abrasive cloth for cleaning tube
Sand Cloth 10 Yards X 6 Pack Tray
5/Pack X 12 Pack Tray
5 brushes per pack, 12 packs per tray
4" Synthetic Acid Brush 5/Pack X 12 Pack Tray
Product families
Family
What it's for
Notes
Wire fitting brushes
Clean fitting sockets
Sizes 1/2 to 2 in.
4-In-1 Multi-Purpose Brush
Pipe and fitting cleaning
Harris item 331764
Sand Cloth
Cleaning tube ends
2, 5, 10 and 25 yard
Open Mesh Cloth
Cleaning tube
2, 5 and 10 yard
4" Synthetic Acid Brush
Applying flux
Not on Harris's brushes page
Seller tips
Ask the pipe size to pick the brush size.
Always sell a brush with flux and alloy.
Replace worn brushes; they stop cleaning.
Harris names incorrect heating as the main reason for poorly made joints, and warns that dirt, oil and heavy oxide stop the alloy wetting. A brush is cheap insurance.
Keep brushes for different metals separate so one metal does not contaminate another.